LTH Home

Need Help Finding Dried Hardwood for BBQ Pit

Need Help Finding Dried Hardwood for BBQ Pit
  • Forum HomePost Reply BackTop
    Page 2 of 2 
  • Post #31 - May 14th, 2005, 11:55 am
    Post #31 - May 14th, 2005, 11:55 am Post #31 - May 14th, 2005, 11:55 am
    Bruce wrote:Burns the gunk right off a grid in about 3 seconds, and doubles as a charcoal starter.


    Works a little too well. My grids are porcelain-coated. Cactus burner blistered the coating right off! And then there was time I had the brilliant idea to blast the gunk off a Le Crueset pan. :roll:

    Bill/SFNM
  • Post #32 - May 16th, 2005, 7:03 am
    Post #32 - May 16th, 2005, 7:03 am Post #32 - May 16th, 2005, 7:03 am
    BellevueLonghorn wrote:I ended up buying a 3 lb. rack of St. Louis style (trimmed) spareribs at Whole Foods. I was there and they had them, so I got them, even though I was looking forward to going to Paulina.

    I started my fire using two starter chimneys full of charcoal briquettes and then adding a couple of oak logs once the charcoal was burning well. The fire probably was too hot (275-300) for a good bit of the first hour the ribs were on, but probably averaged somewhere in the 240-260 range over the remaining three hours.

    I used a dry rub on the ribs and periodically mopped them with a mop sauce I quickly concocted of beer, vinegar, melted butter and some spice rub. I mopped them no more than four times, in order to open the pit as infrequently as possible.

    The ribs themselves were georgeous to look at and were pretty smoky in flavor. There was a modest red smoke ring in the meat as well. Those were the positives. On the negative side, I think my mop conconction was a bit too acidic and the ribs were not rubbed with enough salt. The flavor mix of the rub, mop, and smoke wasn't ideal. It wasn't unpleasant to my taste, but it just wasn't what I was shooting for. Unfortunately my wife, who doesn't like smokey food in general, found the ribs just way too smokey for her tastes. My daughter (2) ate a little of them and my son (4) thought they were great. The other negative was that while the meat was clearly cooked and wasn't dryed out at all, it hadn't become as tender as I like. I don't like ribs in the FOB category, but these required more chewing than I would have preferred. Probably a by-product of cooking them too quickly at the beginning when the fire was burning hot.

    So, I would love to hear suggestions on what I could do better to get a nicely smoked and tender rib that isn't falling off the bone. I suspect a combination of a cooler fire and wrapping the ribs about 2/3 of the way through the cooking time will probably do the trick. I am also going to go heavier on the salt in the rub. I may skip the mop this time.

    Clean up is another issue. I drained the water out of the bottom of my pit and rinsed it out, per the mfg instructions, which generated more nasty grease and smoke infused water. I now have a big bucket of the stuff in my back yard, with no disposal plan. Any suggestions?

    On a brighter note, on Sunday I made a beer can chicken on my Weber that came out perfectly. In fact it was so good that I almost second guessed my purchase of the big pit. Almost.

    I personally think mopping spares or any ribs for that matter is a waste of time..keep the fire at 225 or so and the fat will render out and keep those ribs nice an moist on their own..the less you open the smoker up the better...
    I usually rub mine down about 1/2 hr before I am going to throw them on the cooker..last spares i made i cooked at 225 for about 5 1/2 hrs..they were perfect..not chewy but when you bit in to them the whole piece of meat did not come off the bone either..i would say drop the mop..keep the temp down ..when you see the meat pulling back from the bone ends they are getting close..pick up one of the racks with tongs and they should be very flexible in the middle or you can pull a couple rib bones apart ..they should sepearate easily if done
    I dont like foiling ribs either because you can go to undercooked to overcooked pretty easily ...
  • Post #33 - May 16th, 2005, 7:06 am
    Post #33 - May 16th, 2005, 7:06 am Post #33 - May 16th, 2005, 7:06 am
    Bill/SFNM wrote:
    Bruce wrote:Burns the gunk right off a grid in about 3 seconds, and doubles as a charcoal starter.


    Works a little too well. My grids are porcelain-coated. Cactus burner blistered the coating right off! And then there was time I had the brilliant idea to blast the gunk off a Le Crueset pan. :roll:

    Bill/SFNM

    I agree..we use those for starting coals only..
    I like just using a wire brush on the grates while they are still warm..
  • Post #34 - May 16th, 2005, 7:07 am
    Post #34 - May 16th, 2005, 7:07 am Post #34 - May 16th, 2005, 7:07 am
    deke:

    Thanks. I like that suggestion because it is actually easier than what I was doing. Five and a half hours is a long time though. My wife is really going to roll her eyes if I start cooking dinner before lunch.
  • Post #35 - May 16th, 2005, 7:32 am
    Post #35 - May 16th, 2005, 7:32 am Post #35 - May 16th, 2005, 7:32 am
    deke rivers wrote:
    Bill/SFNM wrote:
    Bruce wrote:Burns the gunk right off a grid in about 3 seconds, and doubles as a charcoal starter.


    Works a little too well. My grids are porcelain-coated. Cactus burner blistered the coating right off! And then there was time I had the brilliant idea to blast the gunk off a Le Crueset pan. :roll:

    Bill/SFNM

    I agree..we use those for starting coals only..
    I like just using a wire brush on the grates while they are still warm..


    My grates are expanded metal, and there is no harm done. I use a pizza oven brush also to clean the grates. Small mess = brush. Big mess = burner.
    Bruce
    Plenipotentiary
    bruce@bdbbq.com

    Raw meat should NOT have an ingredients list!!
  • Post #36 - May 16th, 2005, 9:14 am
    Post #36 - May 16th, 2005, 9:14 am Post #36 - May 16th, 2005, 9:14 am
    BellevueLonghorn wrote:deke:

    Thanks. I like that suggestion because it is actually easier than what I was doing. Five and a half hours is a long time though. My wife is really going to roll her eyes if I start cooking dinner before lunch.


    that was for spares..they usually take a it longer than baby backs..5 hrs is nothing though..thats what low and slow is all about...wait until you throw some pork butts on there..if done properly you are looking at 2+ hrs per pound..
    also i forgot to add that i pull the membrane off the bone side of those ribs before cooking too
  • Post #37 - May 16th, 2005, 9:16 am
    Post #37 - May 16th, 2005, 9:16 am Post #37 - May 16th, 2005, 9:16 am
    Bruce wrote:
    deke rivers wrote:
    Bill/SFNM wrote:
    Bruce wrote:Burns the gunk right off a grid in about 3 seconds, and doubles as a charcoal starter.


    Works a little too well. My grids are porcelain-coated. Cactus burner blistered the coating right off! And then there was time I had the brilliant idea to blast the gunk off a Le Crueset pan. :roll:

    Bill/SFNM

    I agree..we use those for starting coals only..
    I like just using a wire brush on the grates while they are still warm..


    My grates are expanded metal, and there is no harm done. I use a pizza oven brush also to clean the grates. Small mess = brush. Big mess = burner.

    yea expanded metal should hold up fine..the porcelain and stainless steel ones dont last though..i have found that after using the weed burner on the stainless steel grates that they started rusting out big time..like the plating got burned off or something
    in any event those things are great for starting a chimney full of coals
  • Post #38 - May 16th, 2005, 10:00 am
    Post #38 - May 16th, 2005, 10:00 am Post #38 - May 16th, 2005, 10:00 am
    deke rivers wrote:[...wait until you throw some pork butts on there..if done properly you are looking at 2+ hrs per pound..

    Deke,

    While I agree 5-hours for spare ribs is ballpark, quoting time/lb ratios is a sure way to get the neophyte in deep water.

    Personally, I go in the 250°-275°(ish) range, never mop, glaze or futz, until the last half hour when I 'might' spay with a little cranberry juice/olive oil mixed with my rub for ribs.

    I've had 12-14 lb briskets give it up to tender perfection in as little as 7.5-hours and as long as 14-hours, 6-lb pork butt in as little as 8--9 hours. I'm talking bone sliding out clean, on the pork butts, and no need for pulling as they fall apart with just a cross-look. :)

    I'm sure your BBQ is very good, and I am not disagreeing with what works for you, simply suggesting BellevueLonghorn not get wedded to the idea of precise time/pound ratios.

    Best advice I can give is learn to build a clean fire and practice, practice, practice.

    Enjoy,
    Gary
    http://www.wiviott.com
    One minute to Wapner.
    Raymond Babbitt

    Low & Slow
  • Post #39 - May 16th, 2005, 10:32 am
    Post #39 - May 16th, 2005, 10:32 am Post #39 - May 16th, 2005, 10:32 am
    G Wiv wrote:
    deke rivers wrote:[...wait until you throw some pork butts on there..if done properly you are looking at 2+ hrs per pound..

    Deke,

    While I agree 5-hours for spare ribs is ballpark, quoting time/lb ratios is a sure way to get the neophyte in deep water.

    Personally, I go in the 250°-275°(ish) range, never mop, glaze or futz, until the last half hour when I 'might' spay with a little cranberry juice/olive oil mixed with my rub for ribs.

    I've had 12-14 lb briskets give it up to tender perfection in as little as 7.5-hours and as long as 14-hours, 6-lb pork butt in as little as 8--9 hours. I'm talking bone sliding out clean, on the pork butts, and no need for pulling as they fall apart with just a cross-look. :)

    I'm sure your BBQ is very good, and I am not disagreeing with what works for you, simply suggesting BellevueLonghorn not get wedded to the idea of precise time/pound ratios.

    Best advice I can give is learn to build a clean fire and practice, practice, practice.

    Enjoy,
    Gary
    http://www.wiviott.com

    i just told him how long mine took last time i cooked some. I was just suggesting his were not on the smoker long enough and that spare ribs generally take longer to cook than babybacks.
    There are many factors involved in how long a piece of meat will be done. He balked at cooking for 5 hrs and I responded that when he gets into pork butts and such he is looking at way longer cook times than ribs afford .."2+" is not an exact time..its done when its done
    I did not state any precise times as you say or dictated how long something should cook for. It was all hypothetical. No different than the approximate times you have listed on your on line bbq guide
    but then again..Im not Professor status yet . i can only hope to reach that level in time
  • Post #40 - May 16th, 2005, 11:09 am
    Post #40 - May 16th, 2005, 11:09 am Post #40 - May 16th, 2005, 11:09 am
    deke rivers wrote: He balked at cooking for 5 hrs and I responded that when he gets into pork butts and such he is looking at way longer cook times than ribs afford .."2+" is not an exact time..its done when its done
    I did not state any precise times as you say.

    Deke,

    I agree he seemed to balk at 5-hours, so your advice was good as it illustrated he needs to have patience.

    We seem to have a wee bit of difficulty communicating via the LTHForum board. I think we need to get together for a few beers and shoot the shit about BBQ. I imagine in short order we'd realize we agree on matters BBQ a lot more than it might seem.

    Far as Professor status goes, take my 5-Step course and, maybe, I'll accord you assistant professor status. :wink:

    Enjoy,
    Gary
    One minute to Wapner.
    Raymond Babbitt

    Low & Slow
  • Post #41 - May 16th, 2005, 2:45 pm
    Post #41 - May 16th, 2005, 2:45 pm Post #41 - May 16th, 2005, 2:45 pm
    I didn't balk. I love the whole BBQ experience and would happily spend all day tending the fire in the pit. I simply commented that 5.5 hours is a long time. I meant for spare ribs, specifically. I have read a lot of BBQ recipes, how-to's etc. and five and a half hours is definitely at the long end of the range of recommendations I have seen. That was all I was commenting on. Not saying it doesn't work great, mind you.
  • Post #42 - May 17th, 2005, 8:36 am
    Post #42 - May 17th, 2005, 8:36 am Post #42 - May 17th, 2005, 8:36 am
    BellevueLonghorn wrote:I didn't balk. I love the whole BBQ experience and would happily spend all day tending the fire in the pit. I simply commented that 5.5 hours is a long time. I meant for spare ribs, specifically. I have read a lot of BBQ recipes, how-to's etc. and five and a half hours is definitely at the long end of the range of recommendations I have seen. That was all I was commenting on. Not saying it doesn't work great, mind you.

    You seemed to have the "wow factor" going about a 5.5 hr cook..What I was trying to get at was that the amount of time was short compared to what else you may cook such as butts and brisket. As Gary pointed out..those can get you up in the 16 hr cook range (or more)
    Again i do cook my ribs at a 225 temp which will add to the cook time but I feel the the end product is better when cooked slower. I dont think that time range is out of the ordinary for ribs.
    Bottom line is not to get too hung up on times as the characteristics of the meat will dictate that . They are all different.
    be careful with bbq books too...I have read a couple where the recipes were great but the expected cook times were way off the wall and led me to think that the authors were not really cooking this stuff.
    One of the top bbq competition cooks in the country just released a great cookbook (Dr. BBQ's Big-Time Barbecue Cookbook)
    I know the author personally from BBQ competitions and he is a no nonsense and very down to earth person. You will not find any real exotic recipes in his book but you will get the straight dope on how to turn out some good Q.
    In any event i agree with Gary in that nothing can substitute for practice. get to know fire control first on your particular smoker .
  • Post #43 - May 17th, 2005, 9:11 am
    Post #43 - May 17th, 2005, 9:11 am Post #43 - May 17th, 2005, 9:11 am
    I appreciate all of the input. While I consider myself a pretty skilled artisan with a charcoal grill, I am a total green horn with a BBQ pit. So I will defer to those of you with the hard earned wisdom.

    While we are at it, do any of you have a ballpark estimate for how long it would take to do a full rack of pork (awesome cut of meat, btw) at 275-300 F? I am guessing in that 4-6 hour range somewhere.
  • Post #44 - May 17th, 2005, 9:27 am
    Post #44 - May 17th, 2005, 9:27 am Post #44 - May 17th, 2005, 9:27 am
    BellevueLonghorn wrote:I appreciate all of the input. While I consider myself a pretty skilled artisan with a charcoal grill, I am a total green horn with a BBQ pit. So I will defer to those of you with the hard earned wisdom.

    While we are at it, do any of you have a ballpark estimate for how long it would take to do a full rack of pork (awesome cut of meat, btw) at 275-300 F? I am guessing in that 4-6 hour range somewhere.

    See i was under the impression you had been doing Q for awhile after i caught a glimpse of the smoker you got
    not too sure on the rack of pork ..I have done those but i usually grill those on the kettle with some wood chunks on the charcoal..certain cuts I just feel come out better at grilling temps..some of the other Q'ers on her e might have more info for ya on that cut
  • Post #45 - May 20th, 2005, 5:17 pm
    Post #45 - May 20th, 2005, 5:17 pm Post #45 - May 20th, 2005, 5:17 pm
    Hi,

    I realize this thread has long drifted from the original question, however I do have some additional information.

    Today I was at a BBQ joint where they had a flyer on the counter, which is likely their source of wood.

    "The Singing Firewood Man" aka The Jolly Wood Fellow

    All Hardwood Blend (Oak, Hickory, Cherry, Ash): $75 for 1 face cord, $145 for 2 face cord, $215 for a full cord

    2 years seasoned guaranteed to burn: Oak $85/face cord; White birch: $105/face cord and kindling: $5 per bundle

    Free delivery AND stacking (Stacked, not dumped!)

    Call anytime 6 AM to 10 PM 7 days a week, 800-344-3039

    &&&

    Hi,

    When Gary and I went to the Fancy Food Show, we met the owner of Maine Cooking Woods who offers wood in chunks and planks not normally found in Chicago:

    Maine Golden Birch Very delicate slightly sweet. Good with fish, pork, poultry, lamb, goat and light-meat game birds. Traditionally used to smoke Salmon.

    Maine Wild Apple Slightly sweet and fruity smoke flavor. Beef, poultry, game birds, pork (particularly ham)

    Maine Black Cherry Distinctively sweet and fruity. Beef, poultry & game birds

    Maine Sugar Maple Mildly smoky, sweet flavor. Good with lamb, pork, goat poultry, cheese, vegetables and small game birds.

    Maine White Cedar Fragrant and sweet, ideal for cooking fish & beef

    I did not realize until I read this website that Alder and Birch are the same or at least I conjured this up from the statement, "Maine Golden Birch (the King of Alders)."

    Regards,
    Cathy2

    "You'll be remembered long after you're dead if you make good gravy, mashed potatoes and biscuits." -- Nathalie Dupree
    Facebook, Twitter, Greater Midwest Foodways, Road Food 2012: Podcast
  • Post #46 - May 20th, 2005, 8:11 pm
    Post #46 - May 20th, 2005, 8:11 pm Post #46 - May 20th, 2005, 8:11 pm
    Cathy2 wrote:I did not realize until I read this website that Alder and Birch are the same or at least I conjured this up from the statement, "Maine Golden Birch (the King of Alders)."



    Actually, it's the reverse. Alders and birches are both species of the family BETULACEAE (Birch Family)

    a. Deciduous trees and shrubs with alternate, simple, double serrate-margined, pinnately-veined leaves; stipules present (but often quickly deciduous as in Fagaceae)

    b. Plants monoecious

    c. Flowers very reduced, imperfect, both staminate and carpellate flowers in catkins (the flowers are in many small cymes which are spirally arranged along the axis of the catkin, and are associated with a series of bracts)

    d. Staminate fls.: *-0-6-, 1-4, 0

    Carpellate fls.: * -0-6-, 0, (2) , nut, samara

    e. Perianth parts minute or missing

    f. Ovary with 2 locules, 2 pendulous ovules/locule -- all but one abort; ovary inferior

    g. A family 6 genera, mostly in the Northern Hemisphere. Represented in North America are: Alnus (alder), Betula (birch), Carpinus (ironwood), Corylus (hazelnut), and Ostrya (hop-hornbeam)


    See PRACTICAL PLANT TAXONOMY
  • Post #47 - May 21st, 2005, 8:28 am
    Post #47 - May 21st, 2005, 8:28 am Post #47 - May 21st, 2005, 8:28 am
    Question about wood - I have 2 half planks of that cedar used for planked salmon. It is too charred to use for salmon, but it is burnable. Can I toss it on the grill when I am cooking a steak, or is it too weird a flavor? Normally I like mesquite, so I know my tastes are a bit different from the rest of the group ;)

    thanks
    Leek

    SAVING ONE DOG may not change the world,
    but it CHANGES THE WORLD for that one dog.
    American Brittany Rescue always needs foster homes. Please think about helping that one dog. http://www.americanbrittanyrescue.org
  • Post #48 - May 21st, 2005, 8:50 am
    Post #48 - May 21st, 2005, 8:50 am Post #48 - May 21st, 2005, 8:50 am
    I think the general rule of thumb is that you don't grill or barbecue using the wood of evergreen trees. Though I don't have any first hand experience...
  • Post #49 - May 21st, 2005, 4:35 pm
    Post #49 - May 21st, 2005, 4:35 pm Post #49 - May 21st, 2005, 4:35 pm
    Conifers' wood generally has pitchy resins. Note that turpentine is extracted from pine pitch. If you like retsina in a sauce or marinade, you might like food smoked with cedar. Otherwise, the odds aren't so good.
  • Post #50 - May 21st, 2005, 9:41 pm
    Post #50 - May 21st, 2005, 9:41 pm Post #50 - May 21st, 2005, 9:41 pm
    In this neck of the woods, Juniper, an evergreen, is used as a fuel for cooking - probably because hardwoods are much less available. A Native American friend of mine likes to roast meat over a Juniper fire: very tasty and no hint of any resin. FWIW.

    Bill/SFNM
  • Post #51 - May 21st, 2005, 9:56 pm
    Post #51 - May 21st, 2005, 9:56 pm Post #51 - May 21st, 2005, 9:56 pm
    Leek,

    I have never tried cedar, yet. From the information above, "Maine White Cedar Fragrant and sweet, ideal for cooking fish & beef." Your beef should be well suited for grilling your beef. Using your leftover planks as you suggested is a reasonable way to get the most out of them.

    When I was the fly on the wall listening to Gary and Ken of Maine Cooking Woods talk, there was quite a bit of discussion of planks. Ken sells to quite a few Chefs, who have been know to soak their planks in Whiskey, Bourbon or whatever before plank cooking their meats. Ken suggested a plank was good for maybe 3-4 cooks because by then the resin, which he felt attributed to the flavor, was cooked out. Gary seemed dubious on that fact as he recalls some Wisconsin restaurants using the same thick planks for whitefish for years.

    The method Ken used to extract 3-4 uses from a plank was placing the plank on a cookie sheet, the fish or chicken breast on top, then broiling it. By the 4th cook, he was ready to sacrifice the plank to the fire.
    Cathy2

    "You'll be remembered long after you're dead if you make good gravy, mashed potatoes and biscuits." -- Nathalie Dupree
    Facebook, Twitter, Greater Midwest Foodways, Road Food 2012: Podcast
  • Post #52 - May 21st, 2005, 10:05 pm
    Post #52 - May 21st, 2005, 10:05 pm Post #52 - May 21st, 2005, 10:05 pm
    The Golden Birch is in the same family as the white birch. It is not so hardy as the white birch, so it is not often planted as a landscape plant but is often culled from older forests.

    In New Hampshire it is called the grey birch. My family has been vacationing for over 30 years on a NH lake where one of the lodges on the property is named Grey Birches because the 90 acre property still has many grey birches on it.

    It is the bark that is golden/greyish. A large stand of them is really impressive, unlike any other birch forest I have seen. The bark is much more delicate than the white birch, and I believe it is prone to some sort of borer.
  • Post #53 - May 24th, 2005, 6:40 am
    Post #53 - May 24th, 2005, 6:40 am Post #53 - May 24th, 2005, 6:40 am
    Cathy2 wrote:Hi,

    I realize this thread has long drifted from the original question, however I do have some additional information.

    Today I was at a BBQ joint where they had a flyer on the counter, which is likely their source of wood.

    "The Singing Firewood Man" aka The Jolly Wood Fellow

    All Hardwood Blend (Oak, Hickory, Cherry, Ash): $75 for 1 face cord, $145 for 2 face cord, $215 for a full cord

    2 years seasoned guaranteed to burn: Oak $85/face cord; White birch: $105/face cord and kindling: $5 per bundle

    Free delivery AND stacking (Stacked, not dumped!)

    Call anytime 6 AM to 10 PM 7 days a week, 800-344-3039

    &&&

    Hi,

    When Gary and I went to the Fancy Food Show, we met the owner of Maine Cooking Woods who offers wood in chunks and planks not normally found in Chicago:

    Maine Golden Birch Very delicate slightly sweet. Good with fish, pork, poultry, lamb, goat and light-meat game birds. Traditionally used to smoke Salmon.

    Maine Wild Apple Slightly sweet and fruity smoke flavor. Beef, poultry, game birds, pork (particularly ham)

    Maine Black Cherry Distinctively sweet and fruity. Beef, poultry & game birds

    Maine Sugar Maple Mildly smoky, sweet flavor. Good with lamb, pork, goat poultry, cheese, vegetables and small game birds.

    Maine White Cedar Fragrant and sweet, ideal for cooking fish & beef

    I did not realize until I read this website that Alder and Birch are the same or at least I conjured this up from the statement, "Maine Golden Birch (the King of Alders)."

    Regards,

    Cathy- is this guy out of Chicago? Seeing as its an 800 number and all
  • Post #54 - May 26th, 2005, 10:59 pm
    Post #54 - May 26th, 2005, 10:59 pm Post #54 - May 26th, 2005, 10:59 pm
    I did a reverse lookup of the phone number and came up with this information.

    Singing Firewood Man
    <street address not available>
    Lake Geneva, WI 53147
    (800) 344-3039


    Joe
  • Post #55 - May 27th, 2005, 8:36 am
    Post #55 - May 27th, 2005, 8:36 am Post #55 - May 27th, 2005, 8:36 am
    jpreiser wrote:I did a reverse lookup of the phone number and came up with this information.

    Singing Firewood Man
    <street address not available>
    Lake Geneva, WI 53147
    (800) 344-3039


    Joe


    thanks for the info! ..bet Chicago is not in the free delivery area :)
  • Post #56 - November 16th, 2005, 3:21 pm
    Post #56 - November 16th, 2005, 3:21 pm Post #56 - November 16th, 2005, 3:21 pm
    I live in Arlington Heights and "the singing firewood man" didn't charge me for delivery (at list not separately). I paid $70 for a face cord since I had a $5 coupon from N'West Metalcraft.

    I just called him again for another delivery this year. I've found him to be the best price around and he stacks it for you too!!

Contact

About

Team

Advertize

Close

Chat

Articles

Guide

Events

more